Advantages of our hydraulic crawler material handling machine
YGSZ600
1 strong power system: It adopts Shandong Yineng power, a famous
brand motor in China, with strong power, high efficiency and low
noise. It can play an excellent work efficiency and excellent
performance in any working environment.
2 rubber pipe joint: Imported Eaton or gates buckle type rubber
hose is installed on all high-pressure circuits. Its wear
resistance, super strength and elasticity help to reduce
maintenance and extend service life.
3 mature and stable hydraulic system: The main hydraulic components
are all high-quality international first-line imported brand
hydraulic components to ensure the good performance of the system.
The pilot control technology is adopted to make the control more
accurate.
4 lifting cab, comfortable and high-end operation layout: The
operator's field of vision in the lifting cab is wide, which is
conducive to safe operation. The cab is designed with reasonable
ergonomics, which can reduce the fatigue strength of the person
with the maximum strength. It is equipped with aviation seats,
sealed cab, and equipped with protective nets to prevent ore
splashing. Equipped with air conditioning, sound provides a
comfortable operating environment.
5 automatic lubrication system: The automatic lubrication system
can better lubricate the articulated parts, save labor and increase
work efficiency when the machine is started.
Quality assurance and field service
1. The warranty period of crawler hydraulic grabber is 12 months or
2000 hours after putting into operation (refer to the after-sales
service agreement for details, whichever comes first). During this
period, if the quality problem is caused by the design and
manufacturing reasons, the seller will repair it free of charge; if
the equipment fault is caused by the buyer's reasons, the seller
will also help to deal with it in time, and the buyer shall be
responsible for the expenses incurred .
2. The buyer shall be responsible for the expenses incurred in the
installation and commissioning of foreign countries. The specific
expenses shall be negotiated separately by both parties and
assisted by the buyer. The Seller shall send experienced
engineering and technical personnel to the buyer's site for
guidance and technical services, and timely handle the faults and
problems during installation and commissioning.
3. Document delivery list
1. Operation manual
2. List of accessories
3. After sales service agreement
4. Product certificate
Main parameter of 60 Ton Material Handling Machine YGSZ600 / YGZ600
| ITEM | unit | YGZ600 |
| Operating weight | kg | 58000 |
| Engine | Model | Cummins | QSL8.9-C360 |
| Power | KW | 264 |
| Ratio | rpm | 2100 |
| Maximum torque | n.m | 1500 |
| Displacement | L | 8.9 |
| Fuel consumption | g/kw.h | Less than 229 |
| Hydraulic system | Main pump | Kawasaki | K5V200DT |
| Rated flow | L/min | 2X285+28 |
| Working pressure | Mpa | 32 |
| Main valve | Japan KYB | KVMG-400 |
| Hydraulic oil tank volume | L | 504 |
| Hydraulic motor | Walking | Korea Doosan | TM70 |
| Swing | Kawasaki | M5X180CH |
| Parameter | Swing speed | rpm | 0-10 |
| Main traction | kn | 317 |
| Walking speed | Km/h | 0-4.5 |
| Max gradeability | % | 30 |
| Ground pressure | kpa | 103 |
| Cabin | Overall size | mm | 1800x1000x1620 |
| Swing supporting | Orbital diameter | mm | 1528 |
| Driving wheel, guide wheel, supporting wheel, and supporting
sprocket wheel | Komatsu system |
| Cylinder | Imported seals/arms With explosion-proof valve |
| Whole machine hose | Gates/Eaton |
| Conductive slip ring | 650A |
| Cab interior | Aviation seat, fluid control pilot |
| Air conditioner | household air conditioner |
| Lubrication syste, | centralization lubrication |
| Alarm system | Frame turning alarm, overload alarm |
| power assisting device | Moving arm lifting installed with nitrogen cylinder |
Main size of High Quality Port Material Handling Machine from China
Factory
| Main size | unit | YGSZ600 |
| Full upper width (excluding body pedal) | mm | 3400 |
| Cabin width | mm | 1000 |
| Cabin height | mm | 3350 |
| Cabin lifting height | mm | 1900 |
| Driver's horizontal line of sight | mm | 2600～4500 |
| Overall length | mm | 16700 |
| Tail swing radius | mm | 5500 |
| Weight height off the ground | mm | 1190 |
| Minimum ground clearance | mm | 400 |
| Center distance between guide wheel and drive wheel | mm | 4260 |
| Track length | mm | 5200 |
| Track space | mm | 2800 |
| Track shoe width | mm | 800 |
| Full width of track equipped with 800 track shoes | mm | 3600 |
| Arm length | mm | 10500 |
| Stick length | mm | 7500 |
| Grab volume | m3 | 3.5t(Grab weight not more than 4 tons) |
Detailed Pictures of 60 Ton Material Handling Machine At Good Price
60 Ton Diesel Type Single Power Material Handling Machine Exported
to South Africa
