Wheel Loader LW300FN 3 Ton Front End Loader With Attachment
LW300FN loader is with Weichai engine, environmental protection and
energy saving, strong power, meet the national II emission
standards. Fixed-axis power shift gearbox, with 4 gears forward and
2 gears reverse, has been tested for a long time, with stable
performance and low failure rate, and can meet the operation
requirements of different working conditions. Single pump shunt,
load sensing steering technology, high efficiency of the system,
energy saving and fuel saving; pressure measuring point lead out,
using centralized pressure measuring device, convenient for the
inspection and maintenance of the hydraulic system.
Translated with www.DeepL.com/Translator (free version)
LW300FN loader performance characteristics
-WEICHAI environmental protection and energy saving, strong power,
meet the national II emission standard.
- Fixed-axis power shift gearbox, forward 4 gears and reverse 2
gears, which has been tested for a long time, with stable
performance and low failure rate, and can meet the operation
requirements of different working conditions.
- Single pump shunt, load sensing steering technology, high
efficiency of the system, energy saving and fuel saving; pressure
measuring point lead out, using centralized pressure measuring
device, convenient for the inspection and maintenance of the
hydraulic system.
- The working device adopts the overall optimized design and
U-shaped beam, which has strong lifting force and digging force;
the new bucket bucket type has small insertion resistance, good
wear resistance and high full bucket coefficient.
- The whole vehicle circuit adopts imported waterproof and
dustproof sealed plugs and centralized fuse box, with reliable
performance and beautiful appearance.
- All-metal molded cab, solid structure, luxurious interior,
seamless glass docking, more open view, beautiful appearance, long
time to maintain the new car color.
Translated with www.DeepL.com/Translator (free version)
LW300FN Wheel Loader Specification
Description | Unit | Parameter value |
Rated operating load | kg | 3000 |
Bucket capacity | m³ | 1.8 |
Machine weight | kg | 10600±200 |
Dump clearance at maximum lift | mm | 2770~3260 |
Reach at maximum lift | mm | 1010~1210 |
Wheel base | mm | 2600 |
Tread | mm | 1850 |
Height of hinge at maximum lift height | mm | 3830 |
Working height(fully lifted) | mm | 4870 |
Max.breakout force | kN | 130 |
Max.horse power | kN | 95 |
Hydraulic cycle time-raise | s | 5.5 |
Total hydraulic cycle time | s | 10 |
Min. turning radius over tyres | mm | 5165 |
Articulation angle | ° | 35±1 |
Gradeability | ° | 28 |
Tyre size | | 17.5-25-12PR |
Overall machine dimension L×W×H | mm | 7050×2482×3118 |
Model | | WP6G125E22 |
Emission standards | | Emission 2 |
Rated Power/Speed | kW/rpm | 92/2200 |
Fuel Tank | L | 170 |
Hydraulic Tank | L | 170 |
Ⅰ-gear(F/R) | km/h | 8/10 |
Ⅱ-gear(F/R) | km/h | 13/30 |
Ⅲ-gear(F) | km/h | 2 4/- |
Ⅳ-gear(F) | km/h | 40/ |
