1.5m3 Self Loading Mixer HK1.5 With Electronic Weighing System 76KW
Euro 2
If you are looking for an efficient, convenient and economical
solution for concrete production and transportation, then a
self-loading concrete mixer is the ideal choice for you. It can
help you simplify the construction process, improve the
construction efficiency, reduce the construction cost, so that your
engineering project more smoothly.
Save Time
- Self-loading concrete mixers can reduce the time spent loading and
unloading concrete back and forth using mixers. At the same time,
the use of self-loading mixers to provide concrete on demand
ensures that work continues and reduces unproductive downtime.
Save Cost
- Reduced labor costs: Traditionally, mixing concrete involves
separately loading, mixing, and transporting materials such as
cement, sand, gravel, and water to the site. Each step usually
involves different staff members. Self-loading concrete mixers
combine these steps into a single machine that is operated by one
person, greatly reducing the amount of labor required.
- Reduced material costs: Self-loading mixers can precisely control
the amount of material used in the concrete mixture, reducing the
possibility of material excess that is often caused by manual
measurement errors. This precision helps minimize waste, resulting
in significant savings in material costs over time.
Convenient to Move
- Compared to traditional concrete mixers, it breaks through the
limitations of fixed operation of automatic loading concrete
mixers, thereby eliminating or greatly reducing the need for
delivery of ready-mixed concrete. In addition, the four-wheel drive
can work normally in bad road conditions.
Easy Operation
- Our self-loading concrete mixers are easy to operate with
integrated loading systems, user-friendly controls, and efficient
mixing mechanisms. It can speed up the mixing and conveying process
of concrete and can complete construction projects faster.
Wide Range of Application Fields
- The self-loading truck concrete machine is not only suitable for
narrow construction sites, such as residential construction, road
construction, road maintenance, small building construction,
infrastructure engineering, precast concrete production, bridge
construction, etc., which saves a lot of costs for our users. It
can also be used for concrete road maintenance, three to five
storey buildings, Bridges, parking lots, warehouses, workshops,
etc.
Ensure Safety
- Adopts profile seamless steel pipe integrated frame. The advantage
of this structural design is that when it is fully loaded, the
center of the entire body will be in the middle of the four wheels,
and the stability during operation is very good.
Specification of 65KW Self Loading Mixer HK1.5
| Model | HK1.5 |
| Type | Integral frame chassis movable, self loading, mixing, transporting |
Function | Concrete, sand, fertilizer compound, wet or dry feed materias
mixing and discharging |
| Productivity | Batch≤15mins, 4 batchs/hour |
| Driving | 4 x 4 |
| Steering | Rear steering |
Engine | Yunnei engine: four-cylinder 2200rpm, 65kw |
| Speed | High speed: 30km/h; Low speed:4km/h |
Gear number | Three forwards, three backwards |
Fuel consumption | Idle state 1L-1.8L, working state 4L-6L. |
| Tire | 23.5-16 (Steel wire tyre) |
| Drum | Geometric volume 2.2 cubic meters, the best stirring 1.2-1..5 cubic
meters |
Spiral blade in tank | Double helix mixing, with the guide screw, so that the mixing
material more uniform.Turn the feed left, turn the discharge right |
Tilt of mixing tank | 16° |
Mixing tank 70°discharges | The tank rotates horizontally to 270 degrees.There is no dead Angle
for discharging around the vehicle |
| Tipping chute | Equipped with 2 chute for detachable to increase discharging length |
| Shovel | Shovel capacity: 0.35m³ |
Bucket discharge switch | Hydraulic gate, electric control |
| Operation handle | Electric control button four-way guide handle |
Moving hydraulic | Pump: Denghong |
Torque converter: HANK |
Work hydraulic | Pump/valve: Denghong |
Mixing system | Speed reducer: HANK |
Mixing motor: ZHENJIANG DALI |
| Drive axle | Liufeng |
Water supply | Hydraulic driving self-priming pumps |
High-pressure water pump wash | High-pressure water pump wash |
Weighing system | Electronic weighing system (language optional) |
| Voltage | Battery 24V-100A 2 pieces |
| Hydraulic oil box | Tankage110L, Summer: NO68 hydraulic oil, winter: NO46 hydraulic
oil, very cold zone: NO35 hydraulic oil |
Water tank capacity | 240L |
Diesel tank capacity | 110L |
Whole weight | Complete vehicle kerb mass 5600kg |
| Cab | Prevent falling objects cab |
| Adjustable steering wheel |
| Adjustable seat |
| Fire extinguisher |
| Astern image |
| Alarm lamp | Standard configuration |
| Radio | Standard configuration |
| A/C | Optional |
| Escape hammer | Standard configuration |
Astern sound prompt | Standard configuration |
Walking control mode | Standard: Configuration mechanical | Optional:Electric control |
How to Operate the Self Loading Mixer?
1. Inspection equipment
Check the liquid level: Check the level of basic fluids, such as
hydraulic oil, engine oil, and coolant. If the liquid is too low,
it should be replenished in time. Check tire pressure: Proper tire
pressure is essential for the stability and maneuverability of the
mixer.
2. Starting device
Turn the key first to start the engine. Then open the control
panel, the screen will show the weighing system and watering
system, etc. Familiarize yourself with the various controls and set
them to appropriate Settings.
3. Control equipment
Using the electronic gear shift lever to control the flexible
movement of the self-loading mixer, the mobile joystick can control
the loading and unloading of concrete, and realize the on-site
production and pouring of concrete.
4. Cleaning equipment
After pouring, cut off the power supply, connect the high pressure
pump, and wash the surface of the equipment. After the basic rinse,
you can use a scraper and brush to clean up the small amount of
concrete left behind.
Detailed Photos of 65KW Self Loading Mixer HK1.5 Max. Output 1.5m3
Rear Steering Sale in Africa
